POLYMER POWDERS
PHOTOPOLYMER RESINS
POLYMER FILAMENTS
Login
If you have any trouble logging in to your account, contact us.
Sign Up
To start 3D printing or Laser Cutting, you'll need to create an account here. Once done, you'll be able to upload your files and get live quotes of yours parts
Already have an account? Log In
Colors & thicknesses
Characteristics
Plywood consists of several sheets of wood, glued one on top of another, alternating the wood grain on adjacent layers. Assembled around a central plate, there is always an odd number of plies.
These two features give Plywood the following properties that are appreciated by cabinetmakers, builders, designers, artists, craftsmen: mechanical resistance (structures, buildings), flexibility (furniture), aesthetic beauty, water resistance, and lightness.
Plywood and laser cutting go hand-in-hand. Laser cutting is precise and allows you to draw extremely fine curves. Engraving on plywood, possible with a laser cutting machine, allows for photo rendering or high-definition printing. The laser makes sharp, clear cuts, so no finishing work is necessary.
Plywood is characterized by its durability. It is flexible at the same time because it is created from separate plies. You can use it for building, furniture, etc. However, the thickness of the plywood may make laser cutting difficult, so we have to be careful.
The use of plywood in laser cutting is especially popular with arts and crafts. Cutting is done without any wear, it’s dust-free, and it’s precise. Perfect finishes without any post-production operation facilitate and encourage its use. The slight oxidation (browning) of the cutting edges even gives the object a certain aesthetic.
Wood can be warped because of humidity in the air, temperature or exposure to light. With this material we recommend avoiding variations of temperature and humidity. Just like raw wood, plywood requires minimal protection. Any waterproofing or water-repellent wood protection product can do the trick. You can also apply varnish on your plywood part. To clean a plywood part, use a clean, soft and lint-free cloth. If you have encrusted stains, it is possible to use sandpaper and sand in the direction of the grain of the wood.
Your price for laser cutting and engraving is automatically calculated when you put your vector file online on our website. It is calculated interactively and depends on some factors, such as the amount of material used, the machine time needed to cut or engrave it, and logistics costs. You can see it change in real time as you make modifications to your vector file. To get the price of your item in just a few clicks, you just have to log in and upload your vector file.
Delivery time is added to the laser cutting and engraving time and depends on the delivery method you choose.
To glue two plywood planks to each other, you can use wood glue or another type (PPU, Epoxy). Whatever type of glue you use, you should put the wood under pressure (a clamp or wood facing).
It is easy to paint plywood. After preparing it with primer, you can use acrylic paint, which dries quickly. The acrylic paint should be thorough enough to fill the wood’s pores. If you want to paint details, the wood ridges may be a disadvantage.
Laser cuts and engraves material by burning its surface. Therefore, the sides of the piece tend to be darkened, and are marked slightly on the edges. Sometimes, marks appear on the cutting line. The sides of the part cut in Plywood might stain skin or clothes, as a thin layer of black wood powder remains on the part.
When burning the surface, the laser also leaves a kerf of a width that can vary, depending on the type of material and the thickness chosen.
When designing your project, you need to take this kerf into account and plan for a surplus of material accordingly.
The following chart lists the kerf sizes for Plywood in the function of the thickness. Our showcased values are derived from our extensive experience and may vary based on the specific design being cut, as well as the cutting direction.
In our catalog:
| Thickness of Plywood (mm) | 2 | 3 | 5 |
| Width of the kerf (mm): Poplar | – | 0.28 – 0.5 | 0.47 – 0.62 |
| Width of the kerf (mm): Okoumé | – | 0.31 – 0.36 | 0.39 – 0.47 |
| Width of the kerf (mm): Ceiba Wood | 0.26 – 0.37 | – | – |
About the laser’s precision and its effect on the material, you also need to keep in mind that your object might get some burning stains on their inner side.
In our European catalog:
| Minimum dimension (mm) | 15 x 15 |
| Maximum dimension (Okoumé and Poplar) (mm) | 940 x 590 |
| Maximum dimension (Ceiba Wood) (mm) | 800 x 585 |
In our American catalog:
| Minimum dimension (in) | 0.59 x 0.59 |
| Maximum dimension (in) | 32 x 18 |
In our European catalog:
| Thickness of Plywood (mm) | 2 | 3 | 5 |
| Minimum distance between two paths (mm) | 2 | 3 | 5 |
In our American catalog:
| Thickness of Plywood (in) | 1/8 |
| Minimum distance between two paths (in) | 1/8 |
For laser engraving, the laser will contour each letter, which will “bolden” the font. Therefore, when you conceive your vector file, you need to:
For laser cutting, it is key to take the kerf into account when designing your text. The texts must be treated like shapes: they must be vectorized and respect the same rules as every other shape.
We offer two types of laser engraving:
Make sure you incorporate different colors in your vector design, according to whether you want a cut, an engraving line or a surface engraving.
| Is it possible to assemble your parts? | Yes |
| Minimum space required for assembly | Depends on the kerf |
If you wish to make Plywood pieces fit into each other and make sure they’ll stay connected, we recommend that you add in nodes. Nodes are small bumps situated in a piece’s slots or tabs, that allow compensating the thickness variations of the material and the kerf. Nodes get compressed when the pieces are assembled and they concentrate the friction on specific points rather than on the slot’s whole surface. This way, the slots can be larger without coming apart, allowing the pieces to stay together.
On top of the nodes, it is important to adequately treat the end of the slots. Sharp angles are a weak point for plywood, and will always fracture at the corner, where efforts get concentrated. A solution to this issue is to add a hole at the corner of each sharp angle. This technique allows for distributing the stress across the whole surface of the hole instead of just one precise point.
| Files with Multiple Objects ? | No |
With Sculpteo’s online laser cutting service you’re just a few clicks away from professional Plywood laser cutting. Your model is cut with the highest quality and delivered straight to your door.
Get started now!
Connect with Google
Connect with Facebook
